Owners Manual

106 Installing System Components
When the front of the card is fully seated, the plastic standoffs snap
over the edge of the card.
Figure 3-15. Installing or Removing an iDRAC6 Enterprise Card (Optional)
6 Close the system. See "Closing the System" on page 83.
7 Reconnect the system and peripherals to their power sources, and turn
them on.
1 iDRAC6 Enterprise card 2 VFlash media slot
3 VFlash SD card 4 retention standoff posts (2)
5 retention standoff tabs (2) 6 iDRAC6 Enterprise card connector
3
2
1
4
5
6
book.book Page 106 Thursday, August 13, 2009 7:27 AM