Systèmes Dell PowerVault Network Attached Storage (NAS) Guide de l'administrateur
Remarques, précautions et avertissements REMARQUE: Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser l'ordinateur. PRÉCAUTION: Une PRÉCAUTION indique un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. AVERTISSEMENT: Un AVERTISSEMENT indique un risque d'endommagement du matériel, de blessure corporelle ou de mort. © 2012 Dell Inc.
Table des matières Remarques, précautions et avertissements..............................................................................2 Chapitre 1: Présentation................................................................................................................5 Déploiement d'iSCSI.................................................................................................................................................5 Matériel et logiciel Dell pris en charge.............................
Modification de partages SMB..............................................................................................................................15 Partage NFS............................................................................................................................................................15 Contrôleur de domaine Windows 2003 en tant que source de mappage d'identité........................................
Présentation 1 Les systèmes Dell Network Attached Storage (NAS) fonctionnent sous le système d'exploitation Microsoft Windows Storage Server 2008 R2, qui offre une interface utilisateur pour les opérations suivantes : • Configuration initiale du système • Gestion unifiée des serveurs de stockage • Configuration simplifiée • Gestion du stockage et des dossiers partagés Le système d'exploitation Windows Storage Server 2008 R2 est spécialement conçu pour fournir des performances optimales pour NAS.
REMARQUE: Pour configurer l'iSCSI pour les systèmes de stockage PowerVault, voir technet.microsoft.com/en-us/ library/ee344838(v=ws.10).
Applications pour gérer votre système NAS 2 Configuration initiale de votre système NAS Pour configurer le BIOS de votre système : 1. Connectez votre système NAS au réseau approprié. Le câblage dépend du type de NIC acheté avec votre système. Les systèmes NX3300 doivent être déployés avec au moins deux systèmes mis en cluster sur le réseau approprié.
La zone Ressources et support de la fenêtre principale du Gestionnaire de serveur contient des liens vers les documentations et téléchargements les plus récents et vous permet de participer à des programmes d'évaluation qui aideront à améliorer les versions futures de Microsoft Windows Storage Server 2008 R2.
Gestion du partage et du stockage La gestion du partage et du stockage permet de centraliser la gestion des dossiers et des volumes partagés sur le réseau : • Pour créer des partages SMB (Server Message Block), voir « Création de partages SMB ». • Pour créer des partages NFS, voir « Création de partages NFS ». REMARQUE: Les opérations de volume ne sont disponibles que lorsque les fournisseurs de matériel Virtual Disk Service (VDS) sont installés sur la solution.
Vous pouvez également effectuer un clic droit sur Services de fichier et cliquer sur Ajouter des services de rôle. La fenêtre Ajouter des services de rôle s'affiche. 3. Cochez la case Distributed File System et suivez l'Assistant. Namespaces (Espaces de noms) Les espaces de noms DFS permettent de grouper des dossiers partagés qui se trouvent sur différents serveurs en un ou plusieurs espaces de noms logiquement structurés.
Diagnostics de groupe Les outils de cette section aident à effectuer des diagnostics ou indiquer des problèmes dans votre système. Pour des informations supplémentaires sur l'utilisation de ces outils, effectuez un clic droit sur Intégrable dans Server Manager puis cliquez sur Aide. Outils de configuration du stockage Les outils de configuration du stockage aident l'administrateur à optimiser certaines tâches administratives.
Page d'accueil de Server Administrator La page d'accueil de Server Administrator fournit un système de gestion à base de navigateur web depuis le nœud géré ou depuis un hôte distant via un LAN, service bas débit, ou réseau sans fil. Lorsque le système NAS est installé et configuré sur le nœud géré, vous pouvez effectuer des fonctions de gestion à distance à partir de n'importe quel système avec un navigateur web pris en charge et une connexion.
Vous pouvez utiliser le bureau à distance pour vous connecter à distance au serveur à l'aide de n'importe laquelle des fonctions suivantes : • Connexion Bureau à distance • Gestion Web à distance • Mini-application d'administration à distance Microsoft Windows Server Pour en savoir plus, voir le Bureau à distance pour l'administration, également disponible sur l'Aide de Windows Server 2008 R2.
Réinstallation du système d'exploitation NAS PRÉCAUTION: Il est recommandé de sauvegarder les disques internes de votre système avant de réinstaller le système d'exploitation NAS. 1. 2. Insérez le support de ressources de réinstallation du système d'exploitation Dell PowerVault NAS (Dell PowerVault NAS Operating System Reinstall), puis mettez le système hors tension. Redémarrez le système NAS et démarrez depuis le support de ressources.
Utilisation de votre système NAS 3 Création d'un partage SMB (Server Message Block) Le protocole Server Message Block (SMB), un contrôle d'accès des systèmes de fichiers basé sur Microsoft Windows, est mis en œuvre en donnant des permissions à des utilisateurs individuels et à des groupes. Pour créer un partage SMB à l'aide du Gestionnaire de serveur : 1. Cliquez sur Démarrer → Programmes → Outils d'administration → Gestion du partage et stockage .
Choisissez l'option appropriée parmi les quatre options possibles, effectuez les actions, puis passez aux étapes de configuration et enfin aux étapes de création d'un partage NFS. Contrôleur de domaine Windows 2003 en tant que source de mappage d'identité 1. Allez sur le Contrôleur de domaine Windows 2003 et installez Identity Management for UNIX. REMARQUE: Il se peut que vous ayez besoin du support Windows 2003 SP 2.
5. Allez sur Ajouter ou supprimer des programmes → Ajouter des composants Windows → Sélectionner d'autres services de fichier réseau ou d'impression. 6. Cliquez sur Détails. 7. Sélectionnez Services Microsoft pour NFS, cliquez sur Détails, puis sélectionnez Mappage de noms d'utilisateur. 8. Cliquez sur Suivant et terminez l'installation. REMARQUE: Redémarrez votre système une fois l'installation terminée. 9.
6. Ajouter des mappages de compte utilisateur et groupe d'un ordinateur Unix à un ordinateur Windows. 7. Autoriser un accès approprié à l'objet d'espace de noms ADS LDS. 8. Configurer la source de mappage. Installer le rôle de serveur AD LDS. Pour installer le rôle de serveur AD LDS : 1. Cliquez sur Démarrer → Outils d'administration → Gestionnaire de serveurs. 2.
8. Après avoir tapé le nom de la partition, cliquez sur Suivant. 9. Dans la fenêtre Répertoires, dans les zones de texte Fichiers de données et Fichier de récupération de données, tapez ou recherchez les emplacements où vous souhaitez stocker les fichiers liés à AD LDS, puis cliquez sur Suivant. 10. Dans la fenêtre Sélection des comptes de service, sélectionnez Compte de service réseau, puis cliquez sur Suivant.
REMARQUE: Cet exemple utilise le numéro de port LDAP par défaut 389. Si vous avez spécifié un numéro de port différent dans l'Assistant de configuration d'Active Directory Lightweight Directory Services, utilisez cette valeur à la place. 3. Cliquez sur OK. L'Éditeur ADSI met à jour son affichage et affiche la nouvelle connexion. 4.
d. Cliquez sur Ajouter pour ouvrir la boîte de dialogue Sélectionner l'objet schéma. e. Cliquez sur gidNumber, puis sur OK. f. Cliquez sur OK. 13. Fermez la MMC, puis cliquez sur Enregistrer. Ajout de mappages de compte utilisateur et groupe d'un ordinateur Unix à un ordinateur Windows Cette procédure comporte les étapes suivantes : • Connexion à un Nom unique ou Contexte d'attribution de nom.
3. Dans la boîte de dialogue Créer un objet, sélectionnez la classe Utilisateur, puis cliquez sur Suivant. 4. Dans la zone de texte Valeur, tapez le nom d'utilisateur, puis cliquez sur Suivant. REMARQUE: Le nom d'utilisateur n'est pas associé à l'utilisateur Windows ou Unix, et peut être n'importe quel nom. 5. Cliquez sur le bouton Plus d'attributs pour modifier les attributs uidNumber, gidNumber et sAMAccountName de ce compte utilisateur.
Configuration de la source de mappage Pour configurer la source de mappage : 1. Cliquez sur Démarrer, effectuez un clic droit sur l'invite de commande, puis cliquez sur Exécuter en tant qu'administrateur pour ouvrir une invite de commande privilégiée. 2.
Le nom du dossier s'affiche comme nom de partage suivi du chemin de partage. Spécifiez les paramètres et permissions NTFS/NFS dans les écrans suivants. REMARQUE: Lors de la création du partage, modifiez les paramètres NTFS pour ajouter les détails du groupe récemment créé avec des permissions spécifiques. (Ceci ajoute tous les nouveaux utilisateurs que vous avez inclus dans le groupe). 5.
Le quota nouvellement créé s'affiche dans le volet central. 5. Sélectionnez un quota et effectuez un clic droit ou utilisez les options situées dans le volet de droite pour en modifier les propriétés. 6. Sélectionnez Gestion du filtrage de fichiers → Filtres de fichier. 7. Effectuez un clic droit ou utilisez l'option Créer un écran de fichier dans le volet de droite. 8.
Extension d'un volume Vous pouvez ajouter davantage d'espace à des partitions principales existantes et à des lecteurs logiques en les étendant en un espace adjacent non attribué sur le même disque. Pour étendre un volume de base, celui-ci doit être au format RAW ou formaté avec le système de fichiers NTFS.
Volume # Lettre Étiquette Système de fichiers Type Taille État Volume 4 H 3 To NTFS Partition 2877 Go Intègre DISKPART> select volume 4 Le volume 4 est le volume sélectionné. DISKPART> extend size=30000 DiskPart a étendu le volume avec succès. Réduction d'un volume Vous pouvez réduire l'espace utilisé par les partitions principales et les lecteurs logiques en les réduisant à l'espace adjacent, contigu sur le même disque.
Informations supplémentaires lors de la suppression d'un volume Voici certaines des nouvelles fonctions de Disk Management : • • • Création de partition simplifiée : lorsque vous effectuez un clic droit sur un Volume, vous pouvez choisir une création de partition de base, fractionnée ou séquencée directement à partir du menu. Options de conversion de disques : lorsque vous ajoutez plus de quatre partitions à un disque de base, vous êtes invité à convertir un disque en style partition dynamique ou GPT.
Vous pouvez activer les copies en double des dossiers partagés uniquement par volume ; vous ne pouvez pas sélectionner des dossiers et fichiers partagés spécifiques sur un volume pour les copier ou non. REMARQUE: La création de copies en double ne remplace pas la création de sauvegardes régulières. PRÉCAUTION: Il existe une limite de 64 copies en double par volume. Lorsque cette limite est atteinte ou lorsque les limites de zone de stockage sont atteintes, la copie en double la plus ancienne est supprimée.
Choix d'un emplacement de stockage Pour stocker les sauvegardes que vous créez, vous devez spécifier un emplacement. En fonction du type de stockage que vous spécifiez, tenez compte des points suivants. Type de stockage Détails Dossier partagé Si vous stockez votre sauvegarde dans un dossier distant partagé, votre sauvegarde est écrasée chaque fois que vous créez une nouvelle sauvegarde. Ne choisissez pas cette option si vous souhaitez stocker une série de sauvegardes.