Sistemas de almacenamiento conectado a la red (NAS) Dell PowerVault Guía del administrador
Notas, precauciones y avisos NOTA: Una NOTA proporciona información importante que le ayuda a utilizar mejor su equipo. PRECAUCIÓN: Una PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos, y le explica cómo evitar el problema. AVISO: Un mensaje de AVISO indica el riesgo de daños materiales, lesiones corporales o incluso la muerte. © 2012 Dell Inc.
Tabla de contenido Notas, precauciones y avisos......................................................................................................2 Capítulo 1: Información general...................................................................................................5 Implementación iSCSI..............................................................................................................................................5 Hardware y software compatibles con Dell.........................
Modificación de recursos compartidos de Message Block..................................................................................15 Recurso compartido NFS........................................................................................................................................15 Controlador de dominio Windows 2003 como Origen de Asignación de identidad.........................................16 Controlador de dominio Windows 2008 como Origen de asignación de identidad.....................
Información general 1 Los sistemas de Network Attached Storage (Almacenamiento conectado a la red - NAS) Dell se ejecutan en el sistema operativo Microsoft Windows Storage Server 2008 R2, el cual proporciona una interfaz de usuario para: • Configuración inicial del sistema • Administración del servidor de almacenamiento unificado • Configuración simplificada • Administración de almacenamiento y carpetas compartidas Windows Storage Server 2008 R2 está especialmente preparado para ofrecer un rendimi
NOTA: Con el fin de configurar iSCSI para los sistemas de almacenamiento PowerVault, consulte technet.microsoft.com/en-us/library/ee344838(v=ws.10).
Aplicaciones para administrar el sistema NAS 2 Configuración inicial del sistema NAS Para configurar el sistema NAS: 1. Conecte el sistema NAS a la red correspondiente. La conexión de cables depende del tipo de tarjeta de interfaz de red (NIC) que se adquirió con el sistema. Los sistemas NX3300 deben implementarse con un mínimo de dos sistemas organizados en clústeres en la red correspondiente.
• Funciones y asignaciones instaladas El área Recursos y soporte técnico de la ventana principal del Administrador de servidores contiene enlaces a la documentación y descargas más recientes, al igual que le permite participar en programas de revisión de comentarios que ayudarán a mejorar futuras versiones de Microsoft Windows Storage Server 2008 R2.
Administración de almacenamiento y recursos compartidos La Administración de almacenamiento y recursos compartidos proporciona una ubicación centralizada para administrar carpetas y volúmenes que se comparten en la red: • • Para crear recursos compartidos Server Message Block (Bloque de mensaje de servidor - SMB), consulte "Creación de recursos compartidos Server Message Block". Para crear los recursos compartidos NFS, consulte "Creación del recurso compartido NFS".
Se muestra la ventana Agregar servicios de función. 3. Marque la casilla de verificación Sistema de archivos distribuido y complete el asistente. Espacios de nombres Los espacios de nombre DFS le permiten agrupar carpetas compartidas que se encuentren en distintos servidores en uno o más espacios de nombre estructurados de forma lógica. Cada espacio de nombre se muestra a los usuarios como una única carpeta compartida con una serie de subcarpetas.
Diagnósticos de grupo Las herramientas de esta sección le ayudan a diagnosticar o notificar problemas en el sistema. Para obtener más información sobre el uso de estas herramientas, haga clic con el botón derecho del mouse en Complemento en el Administrador de servidores y, a continuación, haga clic en Ayuda. Herramientas de configuración de almacenamiento Las herramientas de configuración ayudan al administrador a optimizar determinadas funciones administrativas.
roles - RBAC), autenticación y codificación Secure Sockets Layer (Nivel de socket seguro - SSL) convencional del sector. Página principal de Server Administrator La página principal de Server Administrator ofrece una administración del sistema basada en navegador web desde el nodo administrado o desde un host remoto mediante una red inalámbrica, servicio de conexión telefónica o LAN.
Puede utilizar el escritorio remoto para administración con el fin de iniciar sesión en el servidor de manera remota con cualquiera de las siguientes funciones: • Conexión a escritorio remoto • Administración de web remota • Subprograma de Administración remota Microsoft Windows Server Para obtener más información, consulte el Escritorio remoto para administración, que también se encuentra disponible en la Ayuda de Windows Server 2008 R2.
Reinstalación del sistema operativo NAS PRECAUCIÓN: Se recomienda crear una copia de seguridad de las unidades de disco internas del sistema antes de volver a instalar el sistema operativo NAS. 1. Introduzca el medio de recurso Dell PowerVault NAS Operating System Reinstall (Reinstalación del sistema operativo NAS Dell PowerVault) y apague el sistema. 2. Reinicie el sistema NAS e inicie desde el medio de recurso. NOTA: El sistema NAS se inicia en el medio de recurso de forma predeterminada.
Cómo utilizar el sistema NAS 3 Creación de un recurso compartido Server Message Block El protocolo Server Message Block (Bloque de mensaje de servidor - SMB) es un control de acceso para los sistemas de archivos basados en Microsoft Windows que se implementa por medio de la concesión de permisos a usuarios individuales y grupos. Para crear un recurso compartido SMB utilizando el Administrador de servidores: 1.
Antes de crear el recurso compartido NFS, el administrador debe configurar Asignación de identidad.
1. En el sistema NAS, haga clic en Inicio → Herramientas administrativas → Servicios para Network File System (NFS) . 2. En la ventana que aparece, haga clic con el botón derecho del mouse en Servicios para NFS y seleccione Propiedades. 3. Seleccione Asignación de nombres de usuario como el Origen de asignación de identidad y escriba el Nombre de host de su Servidor de Asignación de nombres de usuario en el espacio que se proporciona. 4.
Configuración de AD LDS para servicios de NFS Para configurar AD LDS para los servicios de NFS deberá realizar lo siguiente: 1. Instalar la función de servidor AD LDS. 2. Crear una nueva instancia AD LDS. 3. Ampliar el esquema AD LDS para admitir la asignación de usuarios NFS. 4. Establecer un nombre de instancia predeterminado para las instancias AD LDS. 5. Actualizar el esquema de Active Directory. 6.
4. En la ventana Nombre de instancia, escriba un nombre para la instancia y haga clic en Siguiente. NOTA: En este ejemplo, puede utilizar nfsadldsinstance como nombre de instancia. 5. En la ventana Puertos, complete los cuadros de texto Número de puerto LDAP y Número de puerto SSL y haga clic en Siguiente. NOTA: El número de puerto LDAP predeterminado es 389 y el número de puerto SSL predeterminado es 636. 6.
Establecimiento de un nombre de instancia predeterminado para las instancias AD LDS Para establecer un nombre de instancia predeterminado para instancias AD LDS: 1. Haga clic en Inicio → Herramientas administrativas → Editor ADSI para abrir Editor ADSI. 2. En el árbol de la consola, haga clic con el botón derecho del mouse en Editor ADSI y seleccione Conectar a. Se abrirá el cuadro de diálogo Configuración de la conexión. a.
11. Agregue los atributos gidNumber y uidNumber a la clase de usuario tal como se indica a continuación: a. Expanda el nodo Esquema de Active Directory, expanda el nodo Clases, haga clic con el botón derecho del mouse en Usuario y haga clic en Propiedades. b. En el cuadro de diálogo Propiedades, haga clic en la ficha Atributos. c. Haga clic en Agregar para abrir el cuadro de diálogo Seleccionar objeto de esquema. d. Haga clic en gidNumber y, a continuación, en Aceptar. e.
NOTA: En este ejemplo, en la sección Contexto de nomenclatura predeterminado [localhost:389], seleccione las propiedades siguientes: CN=nfsadldsinstance, DC=server1. 8. En el cuadro de diálogo Crear objeto, seleccione la clase Contenedor y haga clic en Siguiente. 9. En el cuadro de texto Valor, escriba Usuarios y haga clic en Siguiente. Este valor especifica el nombre del objeto de contenedor que se utilizará para almacenar las asignaciones de cuenta de usuario. 10. Haga clic en Terminar.
1. Haga clic en Inicio, haga clic con el botón derecho del mouse en Símbolo del sistema y haga clic en Ejecutar como administrador para abrir un símbolo del sistema elevado. 2. Vaya al directorio C:\WINDOWS\ADAM y ejecute el comando dsacls para conceder al grupo Todos acceso de lectura al almacenamiento de datos de asignación, tal como se indica a continuación: dsacls "\\server1:389\CN=nfsadldsinstance,dc=server1" /G everyone:GR /I:T 3.
Creación del recurso compartido NFS Antes de crear el recurso compartido NFS, consulte el tema "Recurso compartido NFS". NOTA: Asegúrese de completar los prerrequisitos y los pasos de configuración antes de crear el recurso compartido NFS. Para crear un recurso compartido NFS: 1.
La opción Revisar la configuración y crear recurso compartido muestra los detalles de la Directiva de filtro de archivos y la Directiva de cuota. 5. Para realizar cambios, haga clic en el botón Anterior, o bien haga clic en Crear. Se crearán las opciones seleccionadas (recurso compartido NFS/SMB, Cuota y Filtro de archivos).
4. – MBR (Registro de arranque maestro). – GPT (Tabla de particiones GUID) Seleccione un estilo de partición y haga clic en Aceptar. NOTA: El disco se inicializa como disco básico. 5. En el panel del medio, seleccione el disco y ejecute el asistente Nuevo volumen simple. 6. Seleccione el tamaño del volumen, asigne la letra de unidad, escoja el tipo de sistema de archivos, escriba la etiqueta del volumen, seleccione la opción de formato y complete la operación de creación de volumen.
Ejemplo: C:\Users\administrator.NAS3K>diskpart Microsoft DiskPart version 6.0.6001 Copyright (C) 1999-2007 Microsoft Corporation. En equipo: R01-4 DISKPART> list volume (mostrar volumen) En la tabla siguiente se enumera el volumen: Volumen N.
• • • Si el número de clústeres incorrectos detectado por la reasignación dinámica de clústeres incorrectos es demasiado alto, no puede reducir la partición. Si se produce esta circunstancia, debe considerar el movimiento de los datos y la sustitución del disco. No utilice una copia de nivel de bloque para transferir los datos. La copia de nivel de bloque también copia la tabla de sector incorrecto y el nuevo disco considera que los mismos sectores son incorrectos, aunque sean normales.
3. En la ficha Opciones avanzadas, seleccione la casilla de verificación Habilitar SIS en este volumen y haga clic en Aceptar. Deshabilitación de SIS en un volumen Para deshabilitar SIS en un volumen: 1. En la ficha Volúmenes de Administración de almacenamiento y recursos compartidos, haga clic en el Volumen en el que desea deshabilitar SIS. 2. En el panel Acciones, haga clic en Propiedades. 3.
Selección de volúmenes para realizar copias de seguridad Para crear una copia de seguridad, debe especificar los volúmenes que desea incluir. Los volúmenes que seleccione influyen en aquello que puede recuperar. Dispone de las siguientes opciones de recuperación y volúmenes.
Este permite a los usuarios trasladar los discos fuera de su sitio para establecer protección contra descargas y asegurarse la integridad de las copias de seguridad.