Windows Storage Server 2012 R2를 실행하는 Dell PowerVault Network Attached Storage(NAS) 시스템 관리자 안내서
주, 주의 및 경고 노트: "주"는 컴퓨터를 보다 효율적으로 사용하는 데 도움을 주는 중요 정보를 제공합니다. 주의: "주의"는 하드웨어 손상이나 데이터 손실의 가능성을 설명하며, 이러한 문제를 방지할 수 있는 방법 을 알려줍니다. 경고: "경고"는 재산상의 피해나 심각한 부상 또는 사망을 유발할 수 있는 위험이 있음을 알려줍니다. Copyright © 2014 Dell Inc. 저작권 본사 소유. 이 제품은 미국, 국제 저작권법 및 지적 재산권법에 의해 보호됩니다. Dell™ 및 Dell 로고는 미국 및/또는 기타 관할지역에서 사용되는 Dell Inc.의 상표입니다. 이 문서에 언급된 기타 모든 표시 및 이름 은 각 회사의 상표일 수 있습니다. 2014 - 02 Rev.
목차 1 개요................................................................................................................................5 iSCSI 배포............................................................................................................................................... 5 Dell에서 지원하는 하드웨어 및 소프트웨어...........................................................................................6 시스템의 미리 설치된 역할 및 서비스 구성.................................................................................
NAS 시스템 사용.......................................................................................................23 서버 메시지 블록 공유 생성................................................................................................................. 23 메시지 블록 공유 수정..........................................................................................................................24 NFS 공유.......................................................................................................................
1 개요 Windows Storage Server 2012 R2는 수준 높은 성능과 안정성을 제공하는 고급 스토리지 및 파일 처리 솔루션 입니다. Windows Storage Server 2012 R2 운영 체제를 실행하는 Dell NAS(Network Attached Storage) 시스 템은 매우 비용 효율적이며 스토리지 기능과 함께 공유 스토리지 솔루션을 제공하는 데 도움이 됩니다. 새로운 기능은 다음과 같습니다. • 데이터 중복 제거 - 볼륨 수준에서 사용할 수 있으며 적은 물리적 공간에서 더 많은 데이터를 저장합니다. 데이터 중복 제거는 중복된 데이터 청크를 확인하여 각 청크의 단일 복사본을 유지합니다. 데이터 청크 중 복 복사본은 참조에 의해 청크의 단일 복사본으로 교체됩니다. • 스토리지 공간 — 스토리지 풀을 포함하여 스토리지 관리 기능을 제공합니다.
Dell에서 지원하는 하드웨어 및 소프트웨어 다음 Dell NAS 시스템은 Microsoft Windows Storage Server 2012 R2 운영 체제를 실행합니다. • Dell PowerVault NX3300 • Dell PowerVault NX3200 • Dell PowerVault NX400 Dell PowerVault NX3300, NX3200 및 NX400 시스템은 다음과 같은 Windows Storage Server 2012 R2 버전 을 지원합니다. • Microsoft Windows Storage Server 2012 R2, Workgroup 버전, x64 • Microsoft Windows Storage Server 2012 R2, Standard 버전, x64 시스템의 미리 설치된 역할 및 서비스 구성 조직의 요구사항에 따라, 서버 역할, 역할 서비스 및 기능이 시스템에 미리 설치되고 구성됩니다.
NFS용 서버 NFS 프로토콜을 사용하는 다른 시스템 및 UNIX 기반 시스템과 파일을 공유합니다. 작업 폴더 사용자가 다양한 장치에서 작업 파일에 액세스할 수 있도록 하며, 네트워크 내에서 파 일에 액세스하든 인터넷을 통해 파일에 액세스든 관계없이 동기화된 상태를 유지할 수 있도록 합니다. 스토리지 서비 스 스토리지 관리 기능을 제공합니다. 기능 미리 설치되는 기능은 다음과 같습니다. .NET Framework 3.5(.NET 2.0 및 3.0 포함) 및 4.5 기능 WCF(Windows Communication Foundation) 활성화 서비스를 사용하여 HTTP 또는 TCP 프로토콜을 통해 네트워크에서 원격으로 응용프로그램을 호출합니다. 장애 조치 클러 스터링 여러 서버가 함께 작동하여 고가용성을 제공합니다. 다중경로 I/O Windows에서 스토리지 장치에 여러 데이터 경로를 사용할 수 있도록 지원합니다.
3. 맞춤화된 지원: a) 서비스 태그를 입력하십시오 필드에 시스템 서비스 태그를 입력합니다. b) 제출을 클릭합니다. 여러 가지 지원 범주가 나열되어 있는 지원 페이지가 표시됩니다. 4. 일반 지원: a) 제품 범주를 선택합니다. b) 제품 세그먼트를 선택합니다. c) 제품을 선택합니다. 여러 가지 지원 범주가 나열되어 있는 지원 페이지가 표시됩니다. 관련 설명서 경고: 시스템과 함께 제공되는 안전 및 규정 정보를 참조하십시오. 보증 정보는 이 문서 안에 포함되어 있 거나 별도의 문서로 제공될 수 있습니다. 노트: 모든 PowerVault 설명서를 보려면 dell.com/powervaultmanuals로 이동한 후 시스템 서비스 태 그를 입력하여 시스템 설명서를 가져오십시오. 노트: Dell OpenManage Server Administrator 사용 설명서를 비롯한 모든 Dell OpenManage 문서를 보 려면 dell.com/openmanagemanuals로 이동하십시오.
설명서에 대한 사용자 의견 이 설명서에 대한 의견이 있는 경우 documentation_feedback@dell.com으로 보내주십시오. 또는 모든 Dell 설명서 페이지에 있는 Feedback(피드백) 링크를 클릭하고 양식을 작성한 후 Submit(제출)을 클릭하여 의견을 보낼 수 있습니다.
NAS 시스템의 초기 구성 2 NAS 시스템의 초기 구성에는 다음과 같은 사항이 포함됩니다. • iSCSI를 사용하는 시스템 또는 솔루션 케이블 연결 • NAS 솔루션 전원 켜기 및 연결 • 서버 관리자를 사용하는 시스템 구성 NAS 시스템의 초기 구성을 완료하려면 다음을 수행합니다. 1. Windows Storage Server 2012 R2를 실행하는 NAS 시스템을 처음으로 시작하는 경우 Default Password(기본 암호) 화면에서 OK(확인)를 누릅니다. 노트: 암호를 변경하기 전에 기본 설정에 따라 시스템 언어를 변경해야 합니다. 2. 기본 언어를 변경하려면 C:\Dell_OEM\MUI로 이동하여 적절한 언어 일괄 파일을 실행합니다. 화면의 메 시지에 따라 기본 언어를 설치합니다. 노트: 시스템은 기본 사용자 이름 administrator와 암호 Stor@ge!로 구성되어 있습니다. 3.
• 서버 상태를 판별하고, 위험 이벤트를 식별하며, 구성 문제나 오류를 분석 및 해결합니다. • 서버 관리자 대시보드에 표시되는 이벤트, 성능 데이터, 서비스 및 BPA(모범 사례 분석기) 결과를 사용자 지정합니다. • 한 번에 여러 대의 서버에서 작업을 수행합니다. 서버 관리자 시작 및 종료 서버 관리자는 관리자가 시스템에 로그온할 때 기본적으로 시작됩니다. 서버 관리자를 닫은 경우 다음 방법 중 하나로 다시 시작할 수 있습니다. • Windows Start(시작) 화면에서 서버 관리자 타일을 클릭합니다 . • Windows 작업 표시줄에서 서버 관리자 아이콘을 클릭합니다. • Windows PowerShell 환경에서, 명령 프롬프트에 servermanager(대소문자 구분)를 입력합니다. 서버 관리자를 종료하려면 서버 관리자 창을 닫으십시오.
이벤트 뷰어 특정 노드나 로그에서 발생한 보기 이벤트 및 사용자 지정 보기를 생성하거나 가져오는 데 사용됩니다. 이 도구는 Summary of Administrative log(관리 로그 요약), Recently Viewed Node(최근에 확인한 노드) 및 Log Summary(로그 요약)도 표시합니다. 공유 폴더 시스템의 파일 공유를 중앙 방식으로 관리하는 데 사용됩니다. 공유 폴더를 사용하면 열린 파일 및 사용자를 보고 관리하는 작업 외에도 파일 공유를 생성하고 권한을 설정 할 수 있습니다. 로컬 사용자 및 그룹 컴퓨터에 로컬로 저장되는 사용자와 그룹을 생성하고 관리하는 데 사용됩니다. 성능 실시간 또는 로그를 통해 성능을 모니터링하는 데 사용됩니다. 구성 데이터를 수집하고 이벤트를 추적하여 결과를 분석하고 보고서를 볼 수 있습니다. 장치 관리자 하드웨어가 Window 운영 체제와 통신할 수 있도록 하는 하드웨어 및 장치 드라이버 소 프트웨어 설치를 지원하는 기술을 관리합니다.
작업 폴더 설치 작업 폴더를 설치하려면 다음을 수행합니다. 1. 서버 관리자 메뉴 표시줄에서 Manage(관리) → Add Roles and Features(역할 및 기능 추가)를 클릭합니 다. Add Roles and Features Wizard(역할 및 기능 추가 마법사)가 표시됩니다. 2. Next(다음)를 클릭합니다. 노트: Before you begin(시작하기 전에) 창에서, 설치할 역할 및 기능의 대상 서버, 네트워크 환경을 식별합니다. 3.
새 DFS 네임스페이스 생성 새 DFS 네임스페이스를 생성하려면 다음을 수행합니다. 1. 서버 관리자 메뉴 표시줄에서 Tools(도구) → DFS Management(DFS 관리) 를 클릭합니다. DFS Management(DFS 관리) 창이 표시됩니다. 2. Actions(작업)에서 New Namespace(새 네임스페이스)를 클릭합니다. New Namespace Wizard(새 네임스페이스 마법사)가 표시됩니다. 3. New Namespace Wizard(새 네임스페이스 마법사)의 지침에 따라 마법사를 완료합니다. 노트: 서버가 오프라인이면 네임스페이스 서버를 생성할 수 없습니다. 새 DFS 복제 그룹 생성 새 DFS 복제 그룹을 생성하려면 다음을 수행합니다. 1. 서버 관리자 메뉴 표시줄에서 Tools(도구) → DFS Management(DFS 관리) 를 클릭합니다. DFS Management(DFS 관리) 창이 표시됩니다. 2.
4. Show Replication Groups(복제 그룹 표시)를 클릭하고 상위 도메인에 있는 복제 그룹을 선택합니다. OK(확인)를 클릭합니다. 복제 그룹이 \\parentdomain\rootname 형태로 DFS 관리에 표시됩니다. FSRM(파일 서버 리소스 관리자) FSRM은 관리자가 시스템에 저장된 데이터의 양과 유형을 이해하고, 제어하며, 관리할 수 있는 Windows Storage Server 2012 R2용 도구 모음입니다. 관리자는 FSRM을 사용하여 폴더 및 볼륨에 할당량을 배치하고, 적극적으로 파일을 차단하고, 포괄적인 스토리지 보고서를 생성할 수 있습니다. 이 고급 도구의 집합은 관리자 가 기존 스토리지 리소스를 효율적으로 모니터링할 수 있도록 도울 뿐 아니라 향후 정책 변경사항을 계획하고 구현하는 데에도 도움이 됩니다. FSRM 작업에 포함되는 사항은 다음과 같습니다.
5. Configuration Snapshot(구성 스냅샷) 탭에서 시스템의 현재 MPIO 구성 스냅샷을 캡처하고, 캡처할 정 보의 파일 이름을 지정한 후 Capture(캡처)를 클릭합니다.
NAS 시스템 관리 3 시스템에 다음과 같은 관리 도구가 미리 설치되어 있습니다. • Dell OpenManage Server Administrator • 관리용 원격 데스크톱 Dell OpenManage Server Administrator Dell OpenManage Server Administrator는 다음 두 가지 방법으로 포괄적인 일대일 시스템 관리 솔루션을 제 공합니다. • 통합 웹 브라우저 기반 GUI — Server Administrator 홈 페이지를 통해 • CLI(명령줄 인터페이스) — 운영 체제를 통해 Server Administrator를 사용하여 네트워크에 있는 NAS 시스템을 로컬 및 원격으로 관리할 수 있습니다. Server Administrator는 다음에 대한 정보를 제공합니다.
원격 데스크톱 연결 활성화 Windows Storage Server 2012 R2에서 원격 데스크톱 연결을 활성화하려면 다음을 수행합니다. 1. 서버 관리자에서 Local Server(로컬 서버)를 클릭합니다. 또는 내 컴퓨터를 마우스 오른쪽 단추로 클릭하고 Properties(속성) → Remote Settings(원격 설정) 를 선 택합니다. Properties(속성) 창이 표시됩니다. 2. Properties(속성) 창에서 Remote Desktop(원격 데스크톱)에 Enabled(활성화됨) 하이퍼링크를 클릭합니 다. Windows Storage Server 2012 R2에서는 원격 관리가 기본적으로 활성화됩니다. System Properties(시스템 속성) 창이 표시됩니다. 3. Remote(원격) 탭의 Remote Desktop(원격 데스크톱) 섹션에서 Allow remote connections to this computer(이 컴퓨터에 원격 연결 허용)를 선택합니다.
NAS 운영 체제 다시 설치 주의: NAS 운영 체제를 다시 설치하거나 업그레이드하기 전에 시스템의 내부 디스크 드라이브를 백업해 야 합니다. 1. 외부 스토리지 어레이의 모든 내부 디스크 드라이브 또는 데이터를 백업하십시오. 2. 해당되는 경우, 외부 USB DVD 드라이브를 NAS 시스템에 연결합니다. 3. Dell PowerVault NAS 운영 체제 리소스 매체를 NAS 시스템에 삽입합니다. 4. NAS 시스템의 전원을 끕니다. 5. NAS 시스템을 다시 시작하고 NAS 시스템이 리소스 매체에서 부팅되는지 확인합니다. 오류가 발견되지 않으면 사용자 간섭 없이 운영 체제 다시 설치가 시작되어 진행됩니다. 이 프로세스를 완 료하는 데 30-45분 정도 걸립니다. 오류가 발생할 경우 장치의 전면 패널 LCD에 플래그로 표시됩니다. 문 제를 해결하려면 dell.
NAS 시스템 사용 4 서버 메시지 블록 공유 생성 Windows Storage Server 2012 R2는 SMB(서버 메시지 블록) 3.0 프로토콜을 도입했습니다. SMB는 응용프로 그램이 파일을 읽거나 파일에 쓸 수 있도록 하며 네트워크에 있는 서버 프로그램에서 서비스를 요청하는 네트 워크 파일 공유 프로토콜입니다. 또한 SMB 파일 공유는 사용자 데이터베이스 파일을 저장하고 VM 또는 데이 터베이스를 동적으로 마이그레이션할 수 있습니다. 서버 관리자를 사용하여 SMB 공유를 생성하려면 다음 단계를 따르십시오. 1. 서버 관리자에서, File and Storage Services(파일 및 스토리지 서비스) → Shares(공유) 로 이동합니다. Shares(공유), Volume(볼륨) 및 Quota(할당량) 창이 있는 페이지가 표시됩니다. 2. 새 공유를 생성하려면 Shares(공유) 섹션에서 아래 단계 중 하나를 수행합니다.
메시지 블록 공유 수정 기존 공유의 속성을 수정하려면 다음 단계를 따르십시오. 1. 서버 관리자에서, File and Storage Services(파일 및 스토리지 서비스) → Shares(공유) 로 이동합니다. 2. Shares(공유) 섹션에서 공유를 선택합니다. 3. 마우스 오른쪽 단추를 클릭하고 Properties(속성)를 선택합니다. <공유 이름> Properties(속성) 창이 표시됩니다. 4. General(일반), Permissions(권한), Settings(설정) 및 Management Properties(관리 속성) 등과 같은 여 러 탭을 선택할 수 있습니다. NFS 공유 NFS(네트워크 파일 시스템) 프로토콜은 액세스 제어(UNIX 기반 파일 시스템의 경우)를 제공하며, 네트워크 이 름을 사용하여 특정 클라이언트 시스템과 그룹에 사용 권한을 부여하는 방법으로 구현됩니다. NFS 공유를 생성하기 전에 관리자는 ID 매핑을 구성해야 합니다.
ID 매핑 소스로 Windows 2008 도메인 컨트롤러 Identity Management for UNIX(UNIX용 ID 관리)를 설치하고 구성하려면 다음 단계를 따르십시오. 1. Windows 2008 Domain Controller(Windows 2008 도메인 컨트롤러)로 이동하고 Server Manager(서 버 관리자) → Roles(역할) → Add Role Services(역할 서비스 추가)를 사용하여 Identity Management for UNIX(UNIX용 ID 관리)를 설치합니다. 노트: 이 서비스를 활성화하려면 Windows 2008 도메인 컨트롤러를 다시 시작합니다. 2. NFS client(NFS 클라이언트)로 이동하여 사용자 이름, 그룹 이름, UID 및 GID 세부 정보를 기록해 둡니다. 3. Domain Controller(도메인 컨트롤러)로 이동합니다. 4.
11. Services for NFS(NFS용 서비스)를 선택하고 ID 매핑 소스로 Properties(속성) → Active Directory domain name(Active Directory 도메인 이름)을 마우스 오른쪽 단추로 클릭하고 Windows 2012 도메인 이름을 입력한 다음 Apply(적용)를 클릭합니다. ID 매핑 소스로 사용자 이름 매핑 서버 사용자 이름 매핑을 설치하고 구성하려면 다음을 수행합니다. 1. NAS 시스템의 서버 관리자 메뉴 표시줄에서 Tools(도구) → Services for Network File System (NFS) (NFS(네트워크 파일 시스템)용 서비스)을 클릭합니다. Services for Network file System(네트워크 파일 시스템용 서비스) 창이 표시됩니다. 2. Services for NFS(NFS용 서비스)를 마우스 오른쪽 단추로 클릭하고 Properties(속성)를 클릭합니다.
ID 매핑 소스로 Active Directory Lightweight Directory Services AD LDS(Active Directory Lightweight Directory Services)는 사용자 매핑을 지원할 Active Directory가 존재하 지 않는 환경에서 Windows Storage Server 2012 R2를 실행하는 시스템에서의 ID 매핑에 사용됩니다. AD LDS 매핑을 시작하기 전에 다음 단계를 따르십시오. • • • Windows 기반 시스템의 사용자 및 그룹에 매핑해야 하는 UNIX 기반 시스템의 사용자 및 그룹을 판별합니 다. 각 UNIX 사용자의 UID 및 GID와 각 UNIX 그룹의 GID를 판별합니다. 매핑할 각 UNIX 사용자 또는 그룹에 대해 Windows 기반 컴퓨터에서 사용자 또는 그룹을 생성합니다. 노트: 각 UID 및 GID에는 고유한 매핑이 필요합니다. 일대다 또는 다대일 매핑을 사용할 수 없습니다.
6. AD LDS 설치에 추가 기능이 필요할 경우 Add Features(기능 추가)를 클릭하여 계속 진행한 후 Next(다 음)를 클릭합니다. 7. Active Directory Lightweight Services 창에서 요약 정보를 검토하고 Next(다음)를 클릭합니다. 8. Confirm Installation Selections(설치 선택 확인) 창에서 모든 정보 메시지를 읽고 Install(설치)을 클릭합 니다. 9. Installation Results(설치 결과) 창을 검토하여 설치에 성공했는지 확인합니다. 10. Close(닫기)를 클릭하여 마법사를 종료합니다. Active Directory Lightweight Directory Services 역할이 서버 관리자 대시보드 페이지에 생성됩니다. 새 AD LDS 인스턴스 생성 새 AD LDS 인스턴스를 생성하려면 다음 단계를 따르십시오. 1.
13. Importing LDIF Files(LDIF 파일 가져오기) 창에서, 가져올 .LDF 파일 이름을 선택하고 Next(다음)를 클릭 합니다. 노트: MS-InetOrgPerson.LDF 및 MS-User.LDF가 필요합니다. 14. Ready to Install(설치 준비 완료) 창의 Selections(선택 항목) 아래에서 나열된 선택 항목을 확인하고 Next(다음)를 클릭합니다. AD LDS 서비스가 설치를 시작합니다. 15. Finish(마침)를 클릭하여 마법사를 종료합니다. 노트: AD LDS를 설치한 후 설정하는 동안 문제가 발생하면 완료 창에 문제점이 나열됩니다. 16. 활성 AD LDS 인스턴스가 있는지 확인하려면 Control Panel(제어판) → Programs(프로그램) → Programs and Features(프로그램 및 기능)로 이동합니다. 생성된 모든 AD LDS 인스턴스는 여기에 나열 됩니다.
AD LDS 인스턴스의 기본 인스턴스 이름 설정 AD LDS 인스턴스의 기본 인스턴스 이름을 설정하려면 다음 단계를 따르십시오. 1. 서버 관리자 메뉴 표시줄에서 Tools(도구) → ADSI Edit (Active Directory Service Interface)(ADSI 편집 (Active Directory Service 인터페이스)를 클릭합니다. ADSI Edit(ADSI 편집) 콘솔이 표시됩니다. 2. 콘솔에서 ADSI Edit(ADSI 편집)를 마우스 오른쪽 단추로 클릭하고 Connect to(연결)를 클릭합니다. 또는 ADSI Edit(ADSI 편집) 콘솔에서 Actions(작업) → More Actions(추가 작업) → Connect to(연결)로 이동할 수 있습니다. Connection Settings(연결 설정) 대화상자가 표시됩니다. a.
7. Add or Remove Snap-ins(스냅인 추가 또는 제거) 대화 상자에서 Active Directory Schema(Active Directory 스키마)를 클릭합니다. 8. Add(추가)를 클릭하고 OK(확인)를 클릭합니다. 9. Active Directory Schema(Active Directory 스키마) 노드를 마우스 오른쪽 단추로 클릭하고 Change Active Directory Domain Controller(Active Directory 도메인 컨트롤러 변경)를 클릭하여 이전에 생성 한 AD LDS 인스턴스에 연결합니다. 10. Change Directory Server(디렉터리 서버 변경) 대화 상자의 Change to(다음으로 변경) 아래에서 This Domain Controller(이 도메인 컨트롤러) 또는 AD LDS instance(AD LDS 인스턴스)를 클릭합니다. 11.
고유 이름 또는 명명 컨텍스트에 연결 고유 명명 컨텍스트에 연결하려면 다음 단계를 따르십시오. 1. 서버 관리자 메뉴 표시줄에서 Tools(도구) → ADSI Edit(ADSI 편집)를 클릭합니다. ADSI Edit(ADSI 편집) 콘솔이 표시됩니다. 2. 콘솔에서 ADSI Edit(ADSI 편집)를 마우스 오른쪽 단추로 클릭하고 Connect to(연결)를 클릭합니다. 또는 ADSI Edit(ADSI 편집) 콘솔에서 Actions(작업) → More Actions(추가 작업) → Connect to(연결)로 이동할 수 있습니다. Connection Settings(연결 설정) 대화상자가 표시됩니다. 3. Connection Point(연결 지점)아래에서 Select a well known Naming Context(잘 알려진 명명 컨텍스트 선택) 옵션을 선택합니다. 기본적으로, 드롭다운 메뉴에서 Default naming context(기본 명명 컨텍스트) 옵션이 선택됩니다. 4.
5. More Attributes(추가 특성) 단추를 클릭하여 이 사용자 계정의 uidNumber, gidNumber, 및 sAMAccountName 특성을 편집합니다. 노트: uidNumber 및 gidNumber는 매핑되는 UNIX 사용자의 UID 및 GID를 나타내며, sAMAccountName은 NFS용 서버를 실행 중인 컴퓨터에서 로컬 Windows 사용자의 이름과 일치해 야 합니다. More Attributes(추가 특성) 단추를 선택한 후에 uidNumber 및 gidNumber가 나타나지 않으면 ADSI Edit(ADSI 편집) MMC를 닫았다가 다시 여십시오. 6. OK(확인)를 클릭합니다. 그룹 계정 매핑 추가 그룹 계정 매핑을 추가하려면 다음 단계를 따르십시오. 1. ADSI Edit(ADSI 편집)에서 Default naming context(기본 명명 컨텍스트) 노드를 확장하고 파티션 이름을 확장합니다. 2.
매핑 소스 구성 매핑 소스를 구성하려면 다음 단계를 따르십시오.. 1. 2. 키보드에서 Windows 로고 키를 누릅니다. CMD를 입력합니다. Command Prompt(명령 프롬프트) 응용프로그램이 표시됩니다. 3. Command Prompt(명령 프롬프트)를 마우스 오른쪽 단추로 클릭하고 Run as administrator(관리자로 실행)를 선택하여 관리자 권한 명령 프롬프트를 엽니다. 4. 다음 명령을 실행합니다. 여기서 는 AD LDS 인스턴스가 생성된 컴퓨터의 이름이고 는 AD LDS 인스턴스가 사용하는 포트입니다. nfsadmin mapping config adlookup=yes addomain=: 노트: 예를 들어, 다음을 사용하십시오. nfsadmin mapping config adlookup=yes addomain=server1:389 5.
NFS 공유 생성 NFS 공유를 생성하려면 다음 단계를 따르십시오. 1. 서버 관리자 창에서 File and Storage Service(파일 및 스토리지 서비스) 서버 역할로 이동하고 Shares(공 유)를 클릭합니다. Shares(공유), Volume(볼륨) 및 Quota(할당량) 창이 있는 페이지가 표시됩니다. 2. 새 공유를 생성하려면 Shares(공유) 섹션에서 아래 단계 중 하나를 수행합니다. – To create a file share, start the New Share Wizard(파일 공유를 생성하려면 새 공유 마법사 시작) 링 크를 클릭합니다. – Tasks(작업) 드롭다운 목록에 New Share(새 공유)를 선택합니다. New Share Wizard(새 공유 마법사) 창이 표시됩니다. 3.
3. Quota(할당량)를 두 번 클릭하고 오른쪽 창에서 Create Quota(할당량 생성) 옵션을 마우스 오른쪽 단추 로 클릭하거나 사용합니다. 4. 마법사에 따라 경로(할당량을 생성하려는 볼륨 또는 폴더)를 선택하고 원하는 Quota Properties(할당량 속성)를 설정한 다음 Create(생성)를 클릭합니다. 새로 생성된 할당량이 가운데 창에 표시됩니다. 5. 기존 할당량을 선택하고 마우스 오른쪽 단추를 클릭하거나 오른쪽 창에 있는 옵션을 사용하여 할당량 속 성을 변경합니다. 6. File Screening Management(파일 차단 관리) → File screens(파일 차단)를 클릭합니다. 7. 마우스 오른쪽 단추를 클릭하거나 오른쪽 창에서 Create File Screen(파일 차단 생성) 옵션을 사용합니다. 8.
Windows 인터페이스를 사용하여 기본 볼륨 확장 노트: 디스크에 할당되지 않은 공간이 없는 경우 볼륨을 확장하기 전에 Dell OpenManage Server Administrator를 사용하여 LUN을 확장하십시오. Windows 인터페이스를 사용하여 기본 볼륨을 확장하려면 다음 단계를 따르십시오. 1. 서버 관리자를 열고 Tools(도구) 메뉴를 클릭한 후 Computer Management(컴퓨터 관리) → Storage(스 토리지) → Disk Management(디스크 관리)를 선택합니다. 2. 디스크 관리에서, 확장할 Basic Volume(기본 볼륨)을 마우스 오른쪽 단추로 클릭합니다. 3. Extend Volume(볼륨 확장)을 클릭합니다. 4. 화면의 지침을 따릅니다. 디스크를 선택하고 공간이 양을 입력한 다음 마법사를 완료합니다. Extend Volume Wizard(볼륨 확장 마법사) 창이 표시됩니다.
• 블록 수준 복사본을 사용하여 데이터를 전송하지 마십시오. 블록 수준 복사본도 잘못된 섹터 테이블을 복 사하며 새 디스크는 정상적이더라도 동일한 섹터를 잘못된 것으로 취급합니다. • 원시 파티션(파일 시스템이 없는 파티션) 또는 NTFS 파일 시스템을 사용하는 파티션에 있는 기본 파티션과 논리 드라이브는 축소할 수 있습니다 . 볼륨 삭제 볼륨을 삭제하려면 다음을 수행합니다. 주의: 볼륨을 삭제하기 전에 볼륨에서 공유와 셰도 복사본을 모두 삭제해야 합니다. 해당 볼륨의 공유를 모두 제거하기 전에 볼륨을 제거하면 서버 관리자에 공유가 올바로 표시되지 않을 수 있습니다. 1. 서버 관리자를 열고 Tools(도구) 메뉴를 클릭한 후 Computer Management(컴퓨터 관리) → Storage(스 토리지) → Disk Management(관리 디스크)를 선택합니다. 2.
노트: 서버를 설정하고, 데이터 중복 해제를 활성화하며, 볼륨을 최적화하려면 technet.microsoft.com/en-us/library/hh831434.aspx에서 데이터 중복 해제 설치 및 구성을 참조하 십시오. 공유 폴더의 섀도 복사본 활성화 및 구성 섀도 복사본은 공유 폴더의 이전 콘텐츠를 보는 데 사용됩니다. 볼륨에서 기본값을 사용하여 공유 폴더의 섀도 복사본을 활성화하면 오전 7시에 섀도 복사본이 생성되도록 작업이 예약됩니다. 기본 스토리지 영역은 동일한 볼륨에 있으며 크기는 사용 가능한 공간의 10%입니다. 볼륨 단위로만 공유 폴더의 섀도 복사본을 활성화할 수 있습니다. 복사하거나 복사하지 않을 볼륨에 있는 특정 공유 폴더 및 파일은 선택할 수 없습니다. 노트: 섀도 복사본 생성은 정기적인 백업 생성을 대체하지 않습니다. 주의: 볼륨마다 섀도 복사본의 수가 64개로 제한됩니다. 이 한도에 도달하거나 스토리지 영역 한도에 도 달할 경우 가장 오래된 섀도 복사본이 삭제됩니다.
4. Windows Server 백업 기능에 액세스하려면 다음을 수행합니다. – 서버 관리자를 열고 Tools(도구) 메뉴를 클릭한 후 목록에서 Windows Server Backup(Windows Server 백업)을 선택합니다. – 또는 서버 관리자를 열고 Tools(도구) 메뉴를 클릭한 후 Computer Management(컴퓨터 관리) → Storage(스토리지) → Windows Server Backup(Windows Server 백업)을 선택합니다. 창 가운데에 Windows Server 백업 콘솔이 표시됩니다. 다음과 같은 백업 옵션을 사용할 수 있습니다. – Local Backup(로컬 백업): 시스템에서 Backup Schedule Wizard(백업 일정 마법사) 또는 Backup Once Wizard(한 번 백업 마법사)를 사용하여 정규 백업을 예약하거나 단일 백업을 수행합니다.
그러나 백업이 하나 이상의 중요한 볼륨과 동일한 실제 디스크에 있는 경우 운 영 체제 백업을 수행할 수 없습니다. 또한 선택한 로컬 디스크는 예약된 백업을 저장하기 위한 용도로만 사용되며 Windows 탐색기에 표시되지 않습니다. 외부 하드 디스크 외부 하드 디스크에 백업을 저장할 경우 다음을 수행할 수 있습니다. • • • 파일, 폴더, 응용 프로그램 및 볼륨을 복구합니다. 사용된 백업에 중요한 볼륨이 모두 포함되고 있는 경우 시스템 상태 및 운영 체제 복구를 수행합니다. 재해 방지를 위해 백업을 오프사이트로 쉽게 이동합니다. 외부 하드 디스크에 예약된 백업을 저장할 경우 디스크는 백업을 저장하기 위한 용도로만 사용되며 Windows 탐색기에 표시되지 않습니다. 이 기능을 사용하여 사용자는 재해 방지를 위해 디스크를 오프사이트로 이동할 수 있으며 백업 무결성을 보장할 수 있습니다.