Users Guide
Table Of Contents
- Contents
- Notes, Cautions, and Warnings
- _
- Installation Issues
- RAID 5 Configuration Defaults To RAID 1 After A Hard Drive Replacement
- RAID Configuration Does Not Match Factory Configuration After Reinstalling The Operating System
- The iSCSI Target Icon Is Missing In The Server Manager
- Error: -5000 Shows Unexpected System Error Message
- Error: -5001 Shows Invalid System Error Message
- Error: -5002 Shows Unsupported Hardware Configuration Error
- Error: -5003 Occurred While Creating An Operating System Volume
- Error: -5004 Occurred While Creating An Operating System Volume
- Error: -5005 Occured While Creating An Operating System Volume
- Error: -5006 Occurred While Creating An Operating System Volume
- Error: -5007 Occurred While Creating An Operating System Volume
- Third-party Tools And Utilities Error
- Package Provided Is Not A NAS Appliance Software
- Cannot Install PowerVault NAS Appliance Software On The NAS System
- Reinstallation Error Message Stays On The LCD
- Display Log Console Displays A Wrong Date
- Deployment Issues
- Management Issues
- Desktop Displays Incorrect System Information
- Insufficient Disk Space On A Volume Dedicated For iSCSI Virtual Disk
- Single Instance Storage (SIS) And File Server Resource Manager (FSRM) Display Incorrect Disk Space
- Cannot Install SIS On A Volume Without A Mount Point
- Groveler Service May Not Recognize A Volume After Changing The Drive Letter
- Turning Off The Firewall
- Update Issues
4
Update Issues
The following section discusses various update issues.
PowerVault NAS Update Package Provided Is Not A NAS
Appliance Software
Description The package provided for the PowerVault NAS Initial Configuration Wizard is not a recognized
NAS appliance software package.
Workaround/Solution Ensure that the package downloaded from support.dell.com is compatible with your system.
Cannot Install The PowerVault NAS Update Package On The NAS
System
Description The wrong NAS software appliance has been provided for the system.
Workaround/Solution Go to support.dell.com and download the appropriate NAS appliance software for the system.
Unable to Detect The Dell OpenManage Server Administrator On
The System
Description Dell OpenManage Server Administrator cannot be found on the system.
Workaround/
Solution
To workaround this issue, download the latest version of the OpenManage Server Administrator
from support.dell.com.
1. Launch the installer and follow the instructions on the screen.
2. After installing the OpenManage Server Administrator, reboot the system.
3. After the system boots up, the PowerVault NAS Initial Configuration Wizard launches.
4. Complete the initial configuration steps.
15