Reference Guide

Syntax
system maintenance controllers save-conf controller [options]
Where the argument is:
controller The controller id (e.g. 0)
the option is:
[-usb device]
The full USB device name
list
Description
This command displays the controller name, configuration status, and system member status of all the controllers in the
NAS cluster.
Syntax
system maintenance controllers list
detach
The commands available under detach are:
• status
• start
status
Description
This command displays the status of a currently running detach controller operation.
Syntax
system maintenance controllers detach status
start
Description
This command starts the detach controller operation.
Syntax
system maintenance controllers detach start controller [options]
Where the argument is :
controller The controller id (e.g. 0)
the options are:
[-saveConf/-nosaveConf] Indicate if the basic configuration
should be saved on the detached
controller (by default don't save the
configuration)
[-blocking/-noblocking] Block prompt until detach is done.
Blocking is on by default.
41