Users Guide
Table Of Contents
- Contents
- Notes, Cautions, and Warnings
- Installation Issues
- RAID 5 Configuration Defaults To RAID 1 After A Hard Drive Replacement
- RAID Configuration Does Not Match Factory Configuration After Reinstalling The Operating System
- The iSCSI Target Icon Is Missing In The Server Manager
- Error: -5000 Shows Unexpected System Error Message
- Error: -5001 Shows Invalid System Error Message
- Error: -5002 Shows Unsupported Hardware Configuration Error
- Error: -5003 Occurred While Creating An Operating System Volume
- Error: -5004 Occurred While Creating An Operating System Volume
- Error: -5005 Occured While Creating An Operating System Volume
- Error: -5006 Occurred While Creating An Operating System Volume
- Error: -5007 Occurred While Creating An Operating System Volume
- Third-party Tools And Utilities Error
- Package Provided Is Not A NAS Appliance Software
- Cannot Install PowerVault NAS Appliance Software On The NAS System
- Reinstallation Error Message Stays On The LCD
- Display Log Console Displays A Wrong Date
- Deployment Issues
- Management Issues
- Desktop Displays Incorrect System Information
- Insufficient Disk Space On A Volume Dedicated For iSCSI Virtual Disk
- Single Instance Storage (SIS) And File Server Resource Manager (FSRM) Display Incorrect Disk Space
- Cannot Install SIS On A Volume Without A Mount Point
- Groveler Service May Not Recognize A Volume After Changing The Drive Letter
- Turning Off The Firewall
- Update Issues
• TCP port = 137: NetBIOS TCP
• TCP port = 139: NetBIOS Session
Service:
• TCP port = 445: SMB over TCP
• TCP port = 3389: Remote Desktop
• TCP port = 2463:
•
Workaround/Solution This feature is working as designed.
PowerVault NAS Initial Configuration Wizard Does Not Install Non-
English Languages
Description The PowerVault NAS Initial Configuration Wizard does not successfully install the language on the
system. An error occurs while installing the non-English language packs.
Workaround/
Solution
Perform the following steps to reinstall the language packs:
1. Click Start → Control Panel → Clock, Language, and Region → Change Display Language.
The Regional and Language Options window appears.
2. From the Keyboards and Languages tab, select Install/Uninstall Languages to install the
required language.
3. Select Install Language and browse to C:\dell\mui\
<country_abbreviation>
where the MUI files
are located.
Continuous Launch Of The PowerVault NAS Initial Configuration
Wizard
Description The PowerVault NAS Initial Configuration Wizard experiences a continuous launching error after an
unsuccessful attempt at installing a non-English language pack.
Workaround/
Solution
Perform the following steps to reinstall the language packs:
1. Click Start → Control Panel → Clock, Language, and Region → Change Display Language.
The Regional and Language Options window appears.
2. From the Keyboards and Languages tab, select Install/Uninstall Languages to install the
required language.
3. Select Install Language and browse to C:\dell\mui\
<country_abbreviation>
where the MUI files
are located.
12