Users Guide

Conguring trap notications

Figure 95. Trap notications

Note: This procedure is optional. SNMP notications are not enabled unless you have selected the SNMP

Enabled check box. To disable SNMP notications, clear the SNMP Enable check box and click Submit.

The traps that are supported by the TL1000 Tape Autoloader are listed in “Trap denitions (types)” on

page 131.

To set up trap notications for an SNMP server:

1. In the Congure Library menu in the left navigation pane of the Web User Interface, click SNMP

2. Select the SNMP Enabled check box.

3. Congure the SNMP server and header settings.

• Community - SNMP community name to which the library belongs.

• Name - Unique SNMP name for the system.

• Location - Physical location of the system.

• Contact - Contact person's name.

• SNMPv3 engine ID - A read-only attribute that identies the SNMPv3 engine.

Chapter 4. Operations