Users Guide

Figure 97. SNMPv3 user settings
• Validity - Select the check box to enable and clear the check box to disable.
• User name - SNMPv3 unique user name.
• Authentication - Authentication algorithm: disable, MD5, or SHA. When an algorithm is specied,
an authentication password is required.
• Authentication password - enter a password (see “Conguring Password Rules Settings” on page
44).
• Conrm - Re-enter the Authentication password to conrm it.
• Privacy - Privacy service encryption and decryption algorithm: disable, DES, or AES. When a privacy
algorithm is specied, a privacy password is required.
• Privacy password - enter a password (see “Conguring Password Rules Settings” on page 44).
• Conrm - Re-enter the Privacy password to conrm it.
7. Select the event level to report in the Trap Event box.
8. Click Test to send a test trap notication to the enabled IP addresses.
9. Click Submit to enable the settings.
Uploading and conguring the SSL certicate
Chapter 4. Operations
83