Users Guide
Figure 98. Certicate screen
This library takes in certicate content and key content in two separate .pem les. The library requires a
browser restart or library power reset for a certicate change or update.
1. Use Congure Library > Certicate to upload a SSL certicate.
2. In the Import box, click the Browse... buttons to navigate to the Certicate and Private Key les to be
imported.
3. When the Certicate and Private Key les are selected, click Import in the Import box.
4. Click Ok in the message box to start the certicate import.
5. When the import completes, an Import was successful message appears. Click OK.
Where the current SSL session uses the previous certicate as-is, the new SSL session uses the
imported Certicate. Log off, close and restart the browser, and log back in, using the new imported
Certicate.
6. The information for the imported Certicate is shown.
Figure 99. New certicate
7. To remove a Certicate and Private Key, click Remove in the Remove box.
84
Dell PowerVault TL1000 Tape Autoloader: User's Guide