Users Guide

Table 21. Library error codes (continued)
Code (H) Description
Panel
Indication
Action Required
002C
LDI I/F error.
ACK IU event timeout detected.
-
Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
before normal library operations resume.
• If the problem persists, see “Contacting Dell
technical support” on page 111.
002D
LDI I/F error.
Response IU event timeout
detected.
-
002E
LDI I/F error.
Transfer Ready IU event timeout
detected.
-
002F
LDI I/F error.
Undened error detected.
-
0040
A drive media error detected
upon insertion.
CHK 0040
1. Verify that the cartridge is compatible with
the drive in your library. See “Cartridge
compatibility” on page 93.
2. Verify that the cartridge is not write-
protected. See “Write-Protect switch” on
page 97.
3. If it is a cleaning cartridge, verify that the
cartridge is not expired. See “Cleaning
cartridge” on page 95.
4. Cycle the power supply and try again.
• If the problem is corrected, run Library
Verify before normal library operations
resume.
• If the problem persists, see “Contacting
Dell technical support” on page 111.
0041
A hardware error detected upon
media insertion
CHK 0041
0042
A drive load timeout error
detected upon insertion.
CHK 0042
Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
before normal library operations resume.
• If the problem persists, see “Contacting Dell
technical support” on page 111.
0048 Incompatible medium installed. CHK 0048
Verify that the cartridge is compatible with the
drive installed in the library. See “Cartridge
compatibility” on page 93.
• If the problem is corrected, run Library Verify
before normal library operations resume.
• If the problem persists, see “Contacting Dell
technical support” on page 111.
118 Dell PowerVault TL1000 Tape Autoloader: User's Guide