Users Guide

Table 21. Library error codes (continued)
Code (H) Description
Panel
Indication
Action Required
00B0
Failed to detect media in the
accessor at completion of GET
operation. Suspect the centering
sensor, X motor, or P motor.
CHK 00B0
1. Conrm the media is compatible.
2. Cycle the power supply and try again.
• If the problem is corrected, run Library
Verify before normal library operations
resume.
• If the problem persists, see “Contacting
Dell technical support” on page 111.
00B1
No media is contained in the
specied cell (Cell Empty).
Suspect the centering sensor, X
motor, or P motor.
CHK 00B1
Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
before normal library operations resume.
• If the problem persists, see “Contacting Dell
technical support” on page 111.
00B2
Media detected in the accessor
at completion of centering check
operation. Suspect the centering
sensor.
CHK 00B2
1. If the cartridge remains in the accessor, try
to move the cartridge from the accessor to
the I/O Station with the Operator Panel or
Web User Interface. Remove the cartridge
from the library and inspect for damage and
replace, if necessary.
2. Cycle the power supply and try again.
• If the problem is corrected, run Library
Verify before normal library operations
resume.
• If the problem persists, see “Contacting
Dell technical support” on page 111.
00B3
Media detected in the accessor
at completion of PUT operation.
Suspect the centering sensor.
CHK 00B3
Appendix A. Error codes 123