Users Guide

Table 25. TapeAlert flags supported by the library (continued)
Flag
Number
Flag Name Description Action Required Type
1
04 Library
Hardware D
The library
mechanism has a
hardware fault
that is not
mechanism-
related, or
requires power
cycle to recover.
1. Cycle the power supply and try again.
2. If the problem persists, see “Contacting
Dell technical support” on page 111.
C
06 Library
Interface
The library
identied an
interface fault.
1. Check all cables and cable connections.
2. Restart the operation.
3. If the problem persists, see “Contacting
Dell technical support” on page 111.
C
08 Library
Maintenance
Library preventive
maintenance
required.
Preventive maintenance of the library is
required. Consult the library user's manual for
device-specic preventive maintenance tasks.
W
12 Library Stray
Tape
A cartridge was
left in the drive
inside the library
by a previous
hardware fault.
1. Try unloading the cartridge from the drive
with the Operator Panel or Web User
Interface.
• If the cartridge unloads, move the
cartridge from the drive to the I/O
station. Remove the cartridge and inspect
for damage. If not damaged, return the
cartridge to the library. Run Library Verify
before normal library operations resume.
• If the cartridge did not unload from the
drive, cycle the power supply and try
again.
2. If the problem persists, see “Contacting
Dell technical support” on page 111.
C
13 Library Pick
Retry
There is a
potential problem
with the drive
ejecting a
cartridge short or
with the library
mechanism
picking a cartridge
from a slot.
No action is required. W
14 Library Place
Retry
There is a
potential problem
with the library
mechanism
placing a cartridge
into a slot.
No action is required. W
Appendix B. TapeAlert flags 133