Users Guide
When you decide on a location in your rack for the library, consider that the Operator Panel has a small
LCD screen. The library must be positioned to allow for easy viewing. The rear of the library must be free
from any obstructions to allow easy access to the power switch and other rear panel components.
Note: Before you begin the rack installation of the library, read the safety information in “Rack safety” on
page xv. Also, verify that no desktop feet are attached to the bottom of the library.
To install the library in a rack:
1. Verify that your rack kit includes all the necessary contents.
2. Determine the location in your rack for your library to be installed. With a pencil, mark the location on
the front vertical rails (Figure 17 on page 23) and rear vertical rails (Figure 18 on page 24) in your
rack.
a29z0014
Figure 17. Rack mount screw locations for front vertical rails
Chapter 3. Installation and
conguration 23