Users Guide

a29z0018
7
Figure 22. Creating the rail assemblies
7. Install the rail assemblies into the rack (Figure 23 on page 26). Ensure the 3 holes in the front of the
unit align with the 1U space marked on the vertical rails in Step 2. Secure the rails to the rack with 4
flat-head screws 9 on each side of the rack. Use both of the two screw locations on the rear of the
rack rail (Figure 18 on page 24). Use the top and middle screw locations on the front of the rack rail
(Figure 17 on page 23).
a29z0020
9
9
Figure 23. Installing the rail assemblies
8. Slide the library chassis into the rack. The heads of the large screws 11 appear through the oval
openings on each side of the bezel. Use a Phillips screwdriver to attach these screws to the rack
(Figure 24 on page 27).
26
Dell PowerVault TL1000 Tape Autoloader: User's Guide