Users Guide

• Minimum number of lower case alphabetic characters (a-z) - Choose the minimum number of
lowercase alphabetic characters. The factory default value is 1.
• Minimum number of numeric characters (0-9) - Choose the minimum number of numeric characters.
The factory default value is 1.
• Minimum number of special characters (!@#$%^&*()_+={}|[]\;':"<>?,./) - Choose the
minimum number of special characters. The factory default value is 0.
• Maximum number of identical consecutive characters - Choose the maximum number of identical
consecutive characters. The factory default value is 2. There is no limitation if 0 is selected.
• Maximum number of failed logins before password is locked - Choose the maximum number of failed
logins before the password is locked. The factory default value is 5. Possible range for this conguration
option is 0 - 10. There is no limitation if 0 is selected.
• Maximum number of days before password must be changed - Choose the maximum number of days
before the password must be changed. There is no limitation if 0 is selected.
• Minimum number of days before password can be changed - Choose the minimum number of days
before the password can be changed. A password can be changed immediately if 0 is selected.
• Number of password changes before an old password can be used again - Choose the number of
password changes that are required before a password can be used again. A password can be reused
immediately if 0 is selected.
Click Submit to save all the information.
Saving the library conguration
Figure 44. Save conguration
Note: This procedure is recommended.
Each time that you change the conguration of your library, save the conguration. This function also
maintains several library conguration proles that can be restored to the library when wanted with the
Web User Interface.
To save a library conguration:
1. In the Congure Library menu in the left navigation pane of the Web User Interface, click Save/
Restore
2. In the Save Library Settings box, click Save to create a conguration le of your library on your
computer.
Conguring your library with the Operator Panel
To congure your library with the Operator Panel, complete the following procedures:
1. “Logging in to the Operator Panel” on page 46
2. “Conguring network settings” on page 46
3. “Conguring library settings” on page 47
Chapter 3. Installation and
conguration 45