Users Guide

Rebooting the drive

Commands

RebootDrive

Figure 61. Reboot Drive command

Select Commands > Reboot Drive to force the drive to reboot. You also specify whether the library will

come online or offline after it nishes rebooting.

Press Enter to reboot the drive.

Rebooting the library

Commands

RebootLibrary

Figure 62. Reboot Library command

Select Commands > Reboot Library to force the library to reboot. You also specify whether the library

will come online or offline after it nishes rebooting.

Press Enter to reboot the library.

Logging out of the library

Logout

Figure 63. Logout command

Select Logout to log out of the library. The login screen is displayed for the next user.

Conguring the library

Conguring auto cleaning

Configuration

Configure AutoCleaning

Enable AutoCleaning

Disable AutoCleaning

Figure 64. Auto Cleaning settings

Select Conguration > Congure Auto Cleaning to enable or disable automatic head cleaning of the tape

drive in the library.

Note: It is recommended that the Auto Clean function is enabled on the library. With the Auto Clean

function enabled, drive cleaning occurs automatically. The only time Auto Cleaning is disabled is when

your Backup Application requires that it has control.

The drive can also be cleaned manually. For details, see “Cleaning the drive manually” on page 56.

Conguring the number of active slots

Configuration

ConfigureLibrary

Set ActiveSlotsCount

ActiveSlots

Figure 65. Active slot count settings

Select Conguration > Congure Library > Set Active Slots Count to set the number of active data

cartridge positions within the logical library.

Dell PowerVault TL1000 Tape Autoloader: User's Guide