Users Guide

Conguring Web GUI Settings
a29z0206
Configuration
Configure WEB GUI Settings
Unlock a User Account
Figure 70. Conguring Web GUI settings
Use Conguration > Congure Web GUI Settings > Unlock a User Account to unlock a User Account.
The password of the user unlocked by Unlock a User Account is automatically changed to secure.
Setting the library to factory defaults
Configuration
SetDefault
Figure 71. Factory default settings
Select Conguration > Set Default to reset the library to the factory default settings. See Table 13 on
page 30. The date and time must be reset after restoring factory default settings. See “Conguring date
and time settings” on page 60.
Important: This conguration setting deletes all current library settings, and should be used with utmost
caution.
To restore your library conguration, see “Saving and restoring conguration settings” on page 85.
Servicing the library
The Service menu on the Operator Panel gives users access to troubleshooting and maintenance
diagnostic tools.
Checking the library error status
Service
ViewErrorStatus
ViewLibraryErrorStatus
ViewDriveErrorStatus
Figure 72. Error status menu
Select Service > View Error Status to check the status of the major library components.
Select the component to view its error status:
• Library - Checks the error status of the library.
• Drive - Checks the error status of the tape drive.
If an error occurs, press Enter to display specic error information. You can check the meaning of error
codes in Appendix A, “Error codes,” on page 115.
Running library verify diagnostic procedures
Service
Diagnostics
RunLibraryVerify
Figure 73. Run Library Verify command
62
Dell PowerVault TL1000 Tape Autoloader: User's Guide