Users Guide

– Gateway - Allows access outside the local network.

• IPv6 Settings - Select Use IPv6 to enable the IPv6 Internet Protocol. Select the corresponding check

box to obtain an IP address with stateless auto conguration. Select the corresponding option to obtain

an IP address automatically (DHCP) or to use a static IP address. Enter the following parameters if you

are using static IP address settings:

– IPv6 address - Sets the TCP/IPv6 address of the library on the network.

– Prex Length - Decimal value 0 - 128 indicating the number of contiguous, high-order bits

comprising the network portion of the address.

– Gateway - Allows access outside the local network.

• DNS setting - Select Use DNS to use a domain name server. The DNS server, if entered, allows the

encryption, date and time, and notications IP addresses to be specied with host names instead of

numerical IP addresses.

– DNS IP address - Sets the IP address of the DNS server.

Click Submit to transfer the settings to the library. A message is displayed when the settings are updated

successfully.

Conguring encryption settings for a non-encrypted-licensed library

Figure 91. Encryption settings screen for a non-encrypted-licensed library

Select Congure Library > Encryption to congure an encryption method for data that is stored on tape

cartridges.

Note: Application Managed Encryption (AME) does not require a key.

Chapter 4. Operations