Users Guide

Table 30. Drive Identity page elements (continued)
Menu Item Description 2U Library 4U Library
SCSI Fibre SAS SCSI Fibre SAS
Port A Configuration:
Speed This is the current speed setting of the drive. For
each Fibre Channel drive, click on the drop down
list and select Automatic, 1Gb/s, 2Gb/s, 4 Gb/s,
or 8 Gb/s. For each SAS drive, select Automatic,
3 Gb/s, or 6 Gb/s. Selecting Automatic will
allow library speed to automatically negotiate to
the current server speed.
X X
Topology For each Fibre Channel drive, click LN-Port,
L-Port, or N-Port.
X X
FC-AL Loop
ID
This is the loop position number. The options are:
"Manual" or "Automatic".
X X
Port B Configuration:
Port B is supported for SAS full height drives
only.
Note: Port B is only supported for failover.
X X
Click one of the following:
a77ug064
Figure 104. The Configure Library: Drives page for a 2U library
a77ug095
Topology
FC-AL Loop ID
Figure 105. The Configure Library: Drives page for a 4U library
Operations 121