Users Guide

Note: Follow the instructions in the Dell PowerVault TL4000 Failover Configuration Guide to configure
your environment for failover.
Setting Up Encryption
Note: Application Managed Encryption (AME) does not require a key. Library Managed Encryption
requires a license key. The customer should contact their TSR (technical sales representative) to purchase
this feature.
For information on minimum firmware levels for Application Managed and Library Managed Encryption,
see “Minimum firmware levels for common library features” on page v.
Setting a Drive's Method of Encryption
1. Click Configure Library > Encryption in the left navigation panel.
2. On the Encryption screen, enter the Feature Activation Key to make available the library managed
encryption options.
3. Click Activate to save the key and expand the screen for additional encryption settings.
4. Select Enable SSL for EKM to enable Secure Sockets Layer for the IBM SKLM application.
5. Select an Encryption method for each logical library.
v Without an encryption license key, select None or Application Managed Encryption.
v With an encryption license key, select Library Managed Encryption.
6. Select an Encryption policy for each logical library.
Figure 46. Feature Key verification screen
a77ug199
Figure 47. Feature Activation Key screen
a77ug192
Figure 48. Configure Library: Encryption Activation screen
60 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library: User's Guide