System information

9. Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.

Display Latch


1. Remove the keyboard.
2. Remove the display assembly.
3. Remove the display bezel.
4. Remove the two M2.5 x 4-mm screws that secure the display latch bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.



Back to Contents Page

and pull-tab)
2
top display-cable connector
3
pull-tab on bottom flex-cable
connector
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1
top cover
8M669
2
M2.5 x 4-mm screws (2)
6240E
3
display latch bracket
