System information

Back to Contents Page

Modem
Dell™Latitude™D600ServiceManual


1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the display assembly.
4. Remove the palm rest.
5. Remove the M2 x 3-mm screw.


6. Disconnect the modem cable from the modem.

7. Pull up on the pull-tab to disconnect the modem from the system board connector.


CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
modem
Y0231
4
system board connector

2
pull-tab

5
modem cable

3
M2 x 3-mm screw
4270E



NOTICE: Do not disconnect the modem cable from the system board.
NOTICE: Ensure that the modem cable is routed correctly when you replace the modem.