User's Manual

1 power button
2 undock request button
3 eject button
power button — Press to turn a docked computer on or off. The power button light indicates the power status of the
APR or a docked computer as follows:
Off — The APR is either not connected to electrical power or, if a computer is docked, the computer is turned off or in
hibernate mode.
Amber — The APR is connected to an electrical outlet but the computer is not docked.
Green — Indicates the status of a docked computer:
Steady green — The computer is turned on.
Slow-pulsing green (breathing) — The computer is in standby mode.
undock request button — When green, you can press the button to prepare the computer for physical undocking. The
button blinks during the preparation for undocking and turns off when ready to undock.
eject button — The eject button indicates the status of the APR as follows:
Off — The computer is either not docked or is not ready to be ejected.
Green — The computer is ready to be undocked. Ensure that the slide lock is in the unlocked position, and then press
the eject button to disconnect the computer from the APR.
NOTICE: Do not eject the computer unless the eject button light is green. Ejecting the computer while the light is off
may cause loss of data and damage to the computer or the APR.
Left View