Owners Manual

c Unroute the WWAN cables from the routing channel.

d Remove the WWAN card from the computer [3].

Installing the WWAN card

1 Insert the WWAN card into the slot on the computer.

2 Route the WWAN cables through the routing channel.

3 Connect the WWAN cables to the connectors on the WWAN card.

4 Tighten the screw to secure the WWAN card to the computer

5 Install the:

a battery

b base cover

6 Follow the procedure in After working inside your computer.

Removing the power connector port

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the power connector port:

a Remove the screws to release the metal bracket on the power connector port [1].

b Lift the metal bracket from the computer [2].

c Disconnect the power connector port cable from the computer [3].

d Remove the power connector port from the computer [4].

Removing and installing components