Owners Manual

6 To remove the display assembly:

a Remove the screws that secure the display assembly to the computer [1].

b Open the display [2] and lift the display assembly to remove it from the computer [3].

Installing the display assembly

1 Place the display assembly to align with the screw holders on the computer.

2 Tighten the screws to secure the display assembly to the computer.

3 Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.

4 Connect the antenna cables and display cable to the connectors.

5 Place the display cable bracket over the connector and tighten the screw to secure the display cable to the computer.

6 Place the display hinge bracket and tighten the screw to secure it to the computer.

7 Install the:

a WLAN

b WWAN

c battery

d base cover

8 Follow the procedure in After working inside your computer.

Removing the display bezel

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c display assembly

Removing and installing components