Service Manual

Installing the M.2 Solid State Drive - SSD

NOTE:

Before installing SSD card, ensure that the battery is fully charged or the power cable is plugged in.

1. Place the SSD clip on the laptop.

NOTE:

Ensure to place the SSD clip head in the placeholder in the system chassis.

2. Tighten the M2x3 screw that secures SSD clip to the laptop.

3. Insert the SSD into the socket on the laptop.

4. Place the SSD bracket and tighten the M2x3 screw to secure the SSD to the laptop.

5. Install the:

a) battery

b) base cover

6. Follow the procedure in After working inside your computer.

WLAN card

Removing the WLAN card

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

3. To remove the WLAN card:

a) Remove the M2x3 screw (1) that secures the WLAN card to the laptop [1].

Disassembly and reassembly