Service Manual

b) base cover

5. Follow the procedure in After working inside your system.

Coin-cell battery

Removing the coin cell battery

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

3. To remove the coin cell battery:

a) Disconnect the coin cell battery cable from the connector on the system board [1].

b) Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].

Installing the coin cell battery

1. Place the coin cell battery on the system board.

2. Connect the coin cell battery cable to the connector on the system board.

NOTE:

Route the coin cell battery cable carefully to avoid damaging the cable.

3. Install the:

a) chassis frame

b) battery

c) base cover

4. Follow the procedure in After working inside your computer.

Disassembly and reassembly