Service Manual

Installing the touchpad

1. Insert the bottom edge of the Button Board under the plastic holder tabs first when placing the buttons board back into the chassis.

2. Tighten the M2x3 screws to secure the touchpad panel.

3. Connect the touchpad cable.

4. Connect the SmartCard reader cable to the laptop.

5. Install the:

a) chassis frame

b) SSD card

c) WWAN card

d) WLAN card

e) battery

f) base cover

6. Follow the procedure in After working inside your computer.

SmartCard module

Removing the SmartCard reader

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

c) WLAN card

d) WWAN card

Disassembly and reassembly