Service Manual

d) WWAN card

e) SSD card

f) chassis frame

3. To remove the LED board:

a) Lift the latch and disconnect the LED board cable from the connector on the LED board [1].

b) Remove the M2x3 screw that secures the LED board to the laptop [2].

c) Lift the LED board away from the laptop [3].

Installing the LED board

1. Place the LED board on the laptop.

2. Tighten the M2x3 screw to secure the LED board to the laptop.

3. Connect the LED board cable to the connector on the LED board.

4. Install the:

a) chassis frame

b) SSD card

c) WWAN card

d) WLAN card

e) battery

f) base cover

5. Follow the procedure in After working inside your computer.

Disassembly and reassembly