Users Guide

Dust filter

The dust filter for the Precision Tower 3630 helps protect the system from fine dust particles. After installation of the dust

filter, the BIOS can be enabled to generate a preboot reminder to clean or replace the dust filter based on the time interval set.

Follow these steps to install the dust filter:

1. Align the plastic tabs of the dust filter to the slots on the system chassis and gently press to ensure that the dust filter fits

firmly onto the system.

2. To remove the dust filter:

a. With the help of a plastic scribe, gently pry the edge from the bottom to loosen the dust filter [1].

b. Remove the dust filter from the system chassis [2].

Dust filter 107