Users Guide

a. Insert the speaker into the front slot on the system chassis and press it until it clicks into place [1].
b. Connect the speaker cable to the connector on the system board [2].
2. To install speaker for system 95 W CPU system configuration :
a. Replace the speaker into the rear portion of the chassis above the front fan [1].
b. Route the speaker cable along the tabs on the I/O port of the system board [2,3] and connect it to the system board [4].
3. Close the PSU hinge.
4. Install the Cover.
5. Follow the procedure in After working inside your computer.
40
Disassembly and reassembly