Users Guide

5. Close the PSU hinge.

6. To remove the power supply unit (PSU):

a. Disconnect the hard-disk power cable [1].

NOTE: There could be up to four hard-disk power cables depending on the quantity of hard-disk drive installed.

b. Remove the two #6-32x1/4'' screws that secure the power-supply bracket to the chassis [2] and lift the power-supply

bracket from the system [3].

c. Remove the four #6-32x1/4'' screws that secure the power-supply unit to the chassis [4].

d. Lift the PSU off the chassis [5].

7. Disconnect the wiring harness from the 95 W CPU system configuration.

Disassembly and reassembly