Users Guide

Power button module

Removing power button module

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. Cover

b. Front bezel

c. IO panel

3. Open the PSU hinge.

4. Disconnect the power button module cable from the connector on the system board [1].

5. Remove the button module cable from the routing guides next to the system board on the chassis [2,3].

6. Remove the adhesive tape that secures the power button module to the chassis [1].

7. Press the notches to release the power button module and pull the power button module to remove it from the system [2,3].

Disassembly and reassembly