Users Guide

4. Close the PSU hinge.
5. Install the cover.
6. Follow the procedure in After working inside your computer.
Blower and heat sink assembly
Removing heatsink assembly 95 W CPU
These steps applies to system configurations shipped with 95 W CPU.
1. Follow the procedure in Before working inside your computer.
2. Remove the cover.
3. Open the PSU hinge.
4. Remove the three #6-32x1/4'' screws that secure the blower to the heat-sink assembly [1].
5. Flip over the blower and place it to a side [2].
Disassembly and reassembly
69