Owners Manual
Table Of Contents
表 10. 系統設定選項—安全性功能表
Security (安全保護)
TPM 2.0 Security
TPM 2.0 Security On 啟用或停用 TPM 2.0 安全性選項。
TPM 2.0 安全性開啟選項預設為啟用。
證明啟用 啟用以控制在作業系統是否可看見可信賴平台模組 (TPM) 核可階層。
證明啟用選項預設為啟用。
金鑰儲存啟用 啟用以控制在作業系統是否可看見可信賴平台模組 (TPM) 儲存階層。
啟金鑰儲存啟用選項預設為啟用。
SHA-256 BIOS 和 TPM 會在 BIOS 開機期間使用 SHA-256 雜湊演算法將測量延伸至
TPM PCR。
SHA-256 選項預設為啟用。
清除 啟用以決定是否讓電腦清除 TPM 擁有者資訊,並將 TPM 恢復為預設狀態。
清除選項預設為停用。
清除命令 PPI 略過 可控制 TPM 實體操作介面 (PPI)。
清除命令 PPI 略過選項預設為停用。
Chassis Intrusion (機箱侵入) 可控制機箱侵入功能。
此選項預設為已停用。
SMM Security Mitigation 可啟用或停用 SMM Security Mitigation (SMM 安全風險降低)。
此選項預設為啟用。
在下次開機時抹除資料
Start Data Wipe 啟用或停用下次開機時抹除資料。
此選項預設為已停用。
Absolute 啟用、停用或永久停用 Absolute Software 的選配 Absolute Persistence Module
服務的 BIOS 模組介面。
啟用 Absolute 選項預設為啟用。
UEFI Boot Path Security 可控制從 F12 開機選單開機至 UEFI 開機裝置時,電腦是否會提示使用者輸入
管理員密碼 (若有設定)。
一律,內建 HDD 除外選項預設為已啟用。
表 11. 系統設定選項──密碼選單
密碼
Admin Password 設定、變更或刪除管理員密碼。
系統密碼 設定、變更或刪除電腦密碼。
Internal HDD-0 Password 設定、變更或刪除內建 HDD-0 密碼。
NVMe SSD0 設定、變更或刪除 NVMe SSD0 密碼。
Password Configuration
大寫字母 強制密碼必須包含至少一個大寫字母。
此選項預設為已停用。
小寫字母 強制密碼必須包含至少一個小寫字母。
此選項預設為已停用。
數字 強制密碼必須包含至少一個數字。
54 系統設定