User's Manual

Installing Drive-Panel Inserts in the Desktop Computer Drive Panel

1. Place the drive-panel insert tab into the drive-panel slot.

2. Pinch the drive-panel insert release tabs and press the drive panel insert into place.

3. Ensure that the drive-panel insert is correctly seated in the drive panel.
Switching Drive Orientations

1. If installed, remove the floppy drive by following the steps in Removing a Floppy Drive or Media Card Reader (Tower Computer), and reinstall it by
following the steps in Installing a Floppy Drive or Media Card Reader (Desktop Computer).

2. If installed, remove optical drives by following the steps in Removing a CD/DVD Drive (Tower Computer), and reinstall them by following the steps in
Installing a CD/DVD Drive (Desktop Computer).
Drive Panel

Removing the Drive Panel (Tower Computer)

1. Slide the sliding-plate lever to the right, pivot the drive panel outward, and lift to remove the panel.
1
drive panel
2
drive-panel
insert
3
drive-panel insert release tabs
(2)
4
drive-panel insert tab in tab
slot




NOTE: The tower computer supports one more 3.5-inch drive in the front than does the desktop computer.
NOTE: For both tower computers and desktop computers, your drive panel may or may not have a slot for the IEEE 1394 connector.