User's Manual


1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Place the fan flush with the side of the power supply and engage the fan hooks in the three fan slots in the side of the power supply.

4. Slide the fan down until it clicks into place.

5. Connect the fan cable to the fan connector on the system board.
To remove the fan:

1. Disconnect the fan cable from the fan and from the fan connector on the system board.

2. Press in on the fan release tab and lift to remove the fan.

3. Replace the computer cover. See Replacing the Computer Cover.

Drive-Panel Inserts


NOTICE: When placing the fan in the computer, ensure that the cables of other components, such as the power supply, remain in their proper position.
1
fan slots (3)
2
fan release tab
3
fan cable
4
fan connector on system board
5
power supply


CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.