User's Manual


1. On the inside of the drive panel, pinch the two drive-panel insert release tabs together and pull the insert out and to the right just enough to release it
from the drive panel.

2. Set the drive-panel insert aside in a secure location.

Replacing a Drive-Panel Insert

1. Place the drive-panel insert tab into the drive-panel slot.

2. Pinch the drive-panel insert release tabs and press the drive panel insert into place.

3. Ensure that the drive-panel insert is correctly seated in the drive panel.

Replacing the Drive Panel

1. Align the drive-panel tabs with the side-door hinges.

2. Rotate the drive panel toward the computer until it snaps into place on the front panel.

Floppy Drive or Media Card Reader

1
drive panel
2
drive-panel
insert
3
drive-panel insert release tabs
(2)
4
drive-panel insert tab in tab
slot




1
sliding plate
2
sliding-plate lever
3
drive panel
4
drive-panel tabs




CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.