User's Manual



6. Pull the desktop drive retention insert by the handle and set it aside in a safe place.



7. Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out of the 3.5- inch drive bay.



Installing a Floppy Drive or Media Card Reader (Desktop Computer)



1. Follow the procedures in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front panel. See Removing the Front Panel.



4. If you are installing a new floppy drive or Media Card Reader, remove the drive-panel insert (see Removing a Drive-Panel Insert) and remove the

shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.

power cable

floppy-drive cable

floppy-drive connector (FLOPPY)

drive retention insert

sliding-plate lever

floppy drive