Owners Manual

Installing the riser 1 dell ultraspeed drive duo card
1. Press the release latch on the dell ultraspeed drive duo card cover [1] and lift the cover open [2]. Remove the one (M2x2.5) screw [3].
2. To install the M.2 SSD
a) Insert the SSD card into the slot on the module [1], Replace the one (M2x2.5) screw [2] that secures the SSD card and close the
module cover [3].
3. Slide the Dell Ultraspeed Drive Duo Card into the riser 1 slot 2 [1]. Close the riser 1 module release latch [2].
NOTE: Ensure that the Dell Ultraspeed Drive Duo Card bracket is installed correctly in the slot.
Removing and installing components 69