Setup Guide
Remote Access Host Card (
)
1.
2. Network Settings ( ) IP
● 192.168.1.200
● Subnet Mask: 255.255.0.0
: Gateway DNS
3. Precision Host Workstation
( DHCP )
4.
92.168.1.100 ( IP host card)
5. Continue ()
()
6. Log In
7. host card ( ) Idle Timeout Never () Log In
8. Configuration () Audio () HD
9.
a. Enable DHCP ( DHCP)
b. IP IP
c. Subnet Mask Subnet Mask
d. IP host card Subnet Mask Wyse Amulet Hotkey DXZ4 PCoIP Zero Client
e. Primary DNS Server (DNS ) Secondary DNS Server (DNS )
10. Session ()
a. Accept any client ( ) Wyse Amulet Hotkey DXZ4 PCoIP Zero Client
MAC
b. Apply Changes ( )
11. Success () Continue ()
12. Info Version ()
13. MAC Wyse Amulet Hotkey DXZ4 PCoIP Zero Client
: MAC host card ( )
14. Configuration Monitor Emulation ()
15. Monitor Emulation (Video Port 1 Video Port 2 5030) Apply ( )
16. Success () Reset (
)
17. OK ()
18.
19. Precision Workstation
20. host card Wyse Amulet Hotkey DXZ4 PCoIP Zero Client
4
Remote Access Host Card ( ) 7