Users Guide

3-14
Dell Precision 410 Mini Tower Systems User’s Guide
To change the order of the devices, press <Ctrl> and the up- or down-arrow key. If you
want to revert to the original Boot Device Priority settings, press <Ctrl><Del>.
NOTE: If you exit the Device List screen by pressing <Esc> or <Alt><b> without
making any changes, Boot Sequence is set to Device List.
6HWXS 3DVVZ R U G   
Setup Password lets you restrict access to your computer’s System Setup program in
the same way that you restrict access to your system with the system password fea-
ture. The settings are:
 Not Enabled (the default)
 Enabled
 Disabled by Jumper
NOTE: Read “Using the Setup Password Feature” found later in this chapter for
instructions on assigning a setup password and using or changing an existing setup
password. See “Disabling a Forgotten Password” found later in this chapter for
instructions on disabling a forgotten setup password.
$XWR3RZHU2Q
Auto Power On allows you to turn on your computer system automatically. You can
set Auto Power On to turn on the system either every day or every Monday through
Friday at a preset time.
NOTE: This feature will not work if you turn off your system using a power strip or
surge protector.
Select Everyday or Mon–Fri, and then use the down-arrow key to highlight first
the hours field and then the minutes field. Time is kept in a 24-hour format
(
hours:minutes
). To change the start-up time, press the right-arrow key to increase
the number in the highlighted field or press the left-arrow key to decrease the
number. If you prefer, you can type numbers in both fields.
The default for Auto Power On is Disabled.
3RZHU0DQDJHPHQW
For certain types of monitors and most EIDE hard-disk drives, you can reduce system
power consumption by enabling the power management feature. With Power Man-
agement enabled, these monitors and drives automatically switch into low-power
mode during periods of system inactivity.
Power Management can be implemented at three levels—Maximum, Regular, and
Minimum. (The different levels apply to the monitor only; hard-disk drive operation is
the same for all three.) The feature can also be set to Disabled.
23205BK0.BK : 23205C30.FM Page 14 Wednesday, March 18, 1998 1:51 PM
Downloaded from www.Manualslib.com manuals search engine