Service Manual

6 While pressing the power supply release button, slide the power supply

toward the back of the computer.

7 Lift the power supply away from the chassis (see the following figure).

8 Slide the power supply cables out of the chassis through the hole.

Removing the Power Supply

Replacing the Power Supply

1 Slide the power supply cables through the hole into the chassis.

2 Insert the power supply securing tab into the power supply securing

slot on the chassis. Ensure that all five securing tabs are connected to

their slots on the chassis.

3 Slide the power supply toward the front of the computer. See

"Removing the Power Supply."

4 Install the cable retainer.

power supply

securing tabs (5)

power supply release button