Service Manual

98
www.dell.com | support.dell.com
3 Disconnect the control panel cable from the control panel connector.
Disconnect the front-panel cable from the connector on the system
board.
4 Remove all cables that are connected to the front I/O panel.
5 From inside the chassis cover, remove the mounting screw that secures
the front I/O panel to the chassis.
6 Remove the front I/O panel from the chassis.
Removing the I/O Panel
Replacing the I/O Panel
To replace the front I/O panel, perform the removal procedures in reverse,
ensuring that the upright, notched tab on the chassis fits through the hole
at the end of the control panel.