Owners Manual

Installing the Display Assembly

1. Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge.

2. Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.

3. Replace the six M2.5 x 5 screws that secure the display hinges to the palm-rest assembly.

4. Adhere the tape and route the touch-screen cable through the routing guides on the fan.

5. Connect the touch-screen cable and display cable to the system board.

6. Replace the screw that secures the display-cable bracket to the system board.

7. Follow the procedures in After Working Inside Your Computer.

System board

Removing the System Board

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

a) base cover

b) battery

c) fans

d) heatsink

e) SSD

f) memory module

Disassembly and reassembly