Owners Manual

2. Align the screw holes on the I/O-board cable with the screw holes on the I/O-board interposers and adhere the I/O-board cable to

the fans [1].

NOTE:

When installing the I/O board cable, align and connect the I/O board end to the I/O board side and the system

board end to the system board side.

CAUTION: Wrong alignment of the cable might cause damage to the connectors.

3. Replace the four screws (M1.6x5.5) that secure the I/O-board cable to the system board [2].

Removing and installing components