Owners Manual

11. Install the heat sink.

12. Install the I/O-board interposers.

13. install the base cover.

14. Follow the procedure in After working inside your computer.

System board

Removing the system board

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. Remove the solid state drive.

4. Remove the I/O-board interposers.

5. Remove the battery.

6. Remove the heat sink.

7. Remove the system fans.

8. To remove the system board:

a) Open the latch and disconnect the camera cable from the system board [1].

Removing and installing components