Owners Manual

11. Install the system fans.

12. Install the heat sink.

13. Install the battery.

14. Install the I/O-board interposers.

15. Install the solid state drive.

16. install the base cover.

17. Follow the procedure in After working inside your computer.

Palm-rest and keyboard assembly

Removing the palmrest and keyboard assembly

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. Remove the solid state drive.

4. Remove the I/O-board interposers.

5. Remove the battery.

6. Remove the heat sink.

Removing and installing components