Service Manual

Adskillelse og samling

Bunddæksel

Removing the Base Cover

1. Follow the procedures in Before Working Inside Your Computer.

2. Close the display and turn the computer over.

3. Turn the system badge flap over and then remove the M2x3 T5 (10), M2x8.5 (2) screws that secure the base cover to the computer

[1,2].

NOTE: Use a Torx #5 screwdriver for the base screws and a Philips screwdriver for the two M2x8.5 screws inside the

badge flap.

4. Pry the edges of the base cover and lift it to remove it from the computer.

Adskillelse og samling 13